Clens Setting Item Flow - Sanyo VCC-9400P Instruction Manual

CAMERA SETTINGS
C LENS setting item flow
Select CAMERA
1
ENTER
2
Select LENS
ENTER
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SEQ ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU BACK
LENS
FOCUS MANU ‚
ZOOM SET ‚
DAY/NIGHT AUTO ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
A
FOCUS: (See page 19)
FOCUS SETTING
LIMIT NEAR 1M
SPEED 2
PRESET OFF
MENU BACK
B
ZOOM: (See page 21)
ZOOM SETTING
SPEED 3
EL ZOOM OFF
V-RESO.UP OFF
PRESET OFF
MENU BACK
C
DAY/NIGHT: (See page 22)
D/N SETTING - AUTO
AGC MAX GAIN +3·
DNR OFF
BURST OFF
FOCUS 1
LEVEL MID
PRESET OFF
MENU BACK
(AUTO mode)
D/N SETTING - COLOR
AGC MAX GAIN OFF
DNR OFF
PRESET OFF
MENU BACK
(COLOR mode)
D/N SETTING - B/W
AGC MAX GAIN OFF
DNR OFF
BURST OFF
FOCUS 1
PRESET OFF
MENU BACK
(B/W mode)
D VIEW ANGLE: (See page 26)
LENS
FOCUS MANU ‚
ZOOM SET
DAY/NIGHT AUTO ‚
VIEW ANGLE OFF
PRESET OFF
MENU BACK
– 18 –
These settings let you select automatic
focus (AUTO) or manual focus. Change
the focus settings in accordance with
the monitoring conditions.
These settings let you adjust the speed
and zoom ratio when using electronic
zoom.
These settings can be used for
automatic switching to color images
during daytime, or to black and white
images at times of low luminance such
as nighttime. Three modes (AUTO,
COLOR and B/W) can be selected.
Change the settings in accordance with
the monitoring conditions.
‚
‚
These settings are for setting the image
angle.
If "OVER" is set, the image angle is set
‚
to approximately 1.05.
English