Sanyo VCC-9400P Instruction Manual page 31

CAMERA SETTINGS
Backlight compensation additional settings 3
• • • •
48 multi-spot metering (MASK)
1
Use the joystick lever (d or c) to select MASK, then
press the ENTER button.
The BLC MASKING screen will appear and the mask pattern
will be blinking.
ENTER
2
Use the joystick lever (j l d c) to move the cursor to
move the mask pattern over the area not to be sensed,
then press the ENTER button.
The mask pattern will be set. You can use the same steps to
set additional mask patterns.
ENTER
BLC MASKING
CONTINUE (ñ)
Note: The initial mask pattern is at the upper left of the screen, and
it is not set. To clear a mask pattern after it is set, press the
ENTER button again.
3
Finishing mask pattern setting
Use the joystick lever (j or l) to move a mask pattern to the
bottom area of the screen and continue holding it for 3
seconds. The PRESET and MENU items will appear on the
screen.
• • • •
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The IRIS SETTING screen will
reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
IRIS SETTING
BLC MASK
SENSE UP OFF
(LEVEL)
40
PRESET OFF
MENU BACK
BLC MASKING
CONTINUE (ñ)
SENSE UP setting
1
Use the joystick lever (j or l) to move the cursor to
SENSE UP, then use the joystick lever (d or c) to select
the power of the electronic sensitivity. (Ex: x4)
Available settings: OFF, x2, x4, x8, x16, x32
Note:
• • • •
Electronic sensitivity boosting (SENSE UP) automatically
lengthens the CCD exposure time in dark situations.
Accordingly, do not use for light target objects. Because
exposure time is lengthened while in operation, moving target
objects may cause conspicuous afterimages and blurs.
• • • •
It is not possible to set SENSE UP (ON) or SHUTTER (LONG)
when MOTION is set to "ON".
• • • •
When SENSE UP is set to "ON", SHUTTER will automatically
be set to "OFF".
• • • •
When AGC is set to "OFF", SENSE UP mode cannot be set to
"ON".
2
Canceling a settings screen
• • • •
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING screen will
reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
LEVEL setting
1
Use the joystick lever (j or l) to move the cursor to
LEVEL, then use the joystick lever (d or c) to adjust the
iris level.
Available settings: 0 – 100
Note: The larger the number, the more it brightens.
2
Canceling a settings screen
• • • •
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING screen will
reappear.
• • • •
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
– 30 –
IRIS SETTING
BLC MULT
SENSE UP x4
(LEVEL)
40
IRIS SETTING
BLC MULT
SENSE UP x4
(LEVEL)
40
PRESET OFF
MENU BACK
English