Installation - Huawei D100 User Manual

• Interface: standard USB interface
• Internet Browser: Internet Explorer 6.0 or Internet
Explorer 7.0, Firefox 1.5 or Firefox 2.0, Safari 3.0

Installation

Step 1: Connect with the data card through the
◆
USB interface.
Note Use the specified data card to connect with the
device.
Step 2: Connect to the power adapter.
◆
•
Use a power adapter that is compatible with
!
the device; otherwise, the device may be
Warning
damaged.
• Please use the AC/DC power supply defined
in the specifications of the charger. An
improper power voltage can cause fire or
malfunction of the charger.
Step 3: Power On/Off.
◆
Press the Power key to switch on the device; press
and hold the Power key to switch off the device.
2
Step 4: Connect to a PC through an Ethernet
◆
cable or WLAN.
•
If the indicator of the Ethernet interface connecting with
a network cable is on, the PC lineate connection is
successful. The Ethernet cable cannot be longer than
100 meters (328 feet). To achieve better effect, use the
shielded cable.
• Whether the PC wireless connection is successful,
please check your PC connected through WLAN. For
Configuring Your Computer
details, please see "
•
If connect your device to one PC with the Ethernet
cable and other PCs with WLAN simultaneously, you
have constructed a LAN and can share the local
resources.
Step 5: Place the device.
◆
•
To prevent electrical devices from being
!
interfered by wireless signals, place electrical
Warning
devices one meter away from the device.
•
Do not put the data card in the slot and
please turn the USB interface connected with
the data card upright when the device is
running.
".