Table of Contents
Advertisement
Problem solving guide
Problem
The Wash/Rinse,
Drying and End
indicator lights flash
simultaneously.
The drain pump works
even when the door is
open.
44
Possible cause
There may be a technical
fault.
The Waterproof system
has reacted.
Remedy
– Clean the water inlet filter
and clean the drain pump
and non-return valve as
described in
"Maintenance". If this does
not resolve the problem,
– switch the dishwasher off
with the On/Off button K.
After a few seconds:
– Switch the dishwasher
back on.
– Select the programme
required with the
programme selector
button.
– Press the Start/Stop
button.
If the programme sequence
indicator lights flash again,
there is a technical fault.
– Call the Service
Department.
– Close the stopcock.
– Call the Service
Department.
Advertisement
Table of Contents
