Panasonic SA-HT720P Service Manual page 2

Dvd home theater sound system
Table of Contents

Advertisement

SA-HT720P / SA-HT720PC
(4) DVD-R (DVD-Video compatible)
(5) CD-Audio (CD-DA)
(6) Video CD
(7) SVCD (Conforming to IEC62107)
(8) CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG
formatted discs)
(9) MP3/WMA
lMaximum number of recognizable audio and picture contents
and groups:
lCompatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 320 kbps
(10) JPEG
lExif Ver 2.1 JPEG Baseline files
lPicture resolution: between 320 x 240 and 6144 x 4096
pixels (sub sampling is 4:2:2 or 4:2:0)
(11) HighMAT Level 2 (Audio and lmage)
Pick up:
Source of light beam:
Wavelength:
lCD:
lDVD:
Audio output (DISC):
Number of channels:
Audio performance:
Frequency response:
DVD (linear audio):
DVD-Audio:
CD-Audio:
S/N ratio:
CD-Audio:
Dynamic range:
DVD (linear audio):
CD-Audio:
Total harmonic distortion:
CD-Audio:
lVideo section
Video system:
Signal system:
Composite video output:
Output level:
Terminal:
4000 audio and picture
contents and 400 groups
Semiconductor Laser
785nm
662nm
5.1 ch (FL, FR, C, SL, SR,
SW)
4 Hz-22 kHz (48 kHz sampling)
4 Hz-44 kHz (96 kHz sampling)
4 Hz-88 kHz (192 kHz
sampling)
4 Hz-20 kHz
95 dB
95 dB
93 dB
0.005 %
NTSC
1 Vp-p (75 Ω)
Pin jack (1 system)
S-video output:
Y output level:
C output level:
Terminal
Component video output (480P/480I):
Y output level:
P
output level:
B
P
output level:
R
Terminal:
Power consumption in standby mode:
approx 0.4W
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
2
1 Vp-p (75 Ω)
NTSC; 0.286 Vp-p (75 Ω)
S terminal (1 system)
1 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
Pin jack (Y: green, P
: blue,
B
P
: red) (1 system)
R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-ht720pc

Table of Contents