Setting Scanner Configuration - Fujitsu ScanSnap N1800 Operator's Manual

5.7

Setting Scanner Configuration

Scanner configuration is set by adding, editing and deleting scanner configuration.
Scanner configuration is information used to identify scanners on the Central Admin
Server, when registering configuration information from a scanner to the Central Admin
Server.
The registered scanners can be reviewed, and modified by the Central Admin Server
functions.
Initially, scanner configuration for each scanner in the scanner group is automatically
added. To prevent scanner configuration from automatically being added, clear the
[Automatically add new scanners to the Central Admin configuration when they are
discovered] check box in the [Central Admin Server Settings] window in advance.
Scanner configuration can be registered on the Central Admin Server in the following
ways.
Import from the [Scanner Config List] window
Import a defined scanner configuration file, and register scanner configuration for
several scanners at once.
Add directly from the [Scanner Config List] window
Add scanner configuration directly from the [Scanner Config List] window for one
scanner at a time.
The following table shows which config items are added/imported to the Central Admin
Server from a config file or from a scanner.
Item
MAC Address
IP address
Subnet Mask
Scanner name
Port Number
Use HTTPS?
Model
Add-in Group
Settings Group
Comment
Comment
Scanner MAC address
Scanner IP address
Scanner subnet mask
Scanner name
Scanner port number
Whether or not HTTPS is used
to communicate with the
scanner
Scanner model
Group name used to identify
applied Add-in install modules
Group name used to identify
applied scanner settings
Note
251
Configuration Configuration
from file from scanner
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes —
Yes —
Yes —