Software Installation
172
Downloaded From projector-manual.com Epson Manuals
Mac System Requirements
Before you install the software, make sure your Mac meets the
following requirements:
Mac OS X 10.3 or later (OS X 10.3.9 or 10.4.5 or later
■
recommended)
AirPort (802.11b) or AirPort Extreme (802.11g) wireless network
■
interface to use EMP NS Connection wirelessly
®
Power Macintosh
■
®
PowerBook,
or iBook
At least 256MB of RAM
■
At least 128MB of free hard disk space
■
XGA (1024 × 768) or better display adapter and monitor, 16-bit
■
color or higher
Installing the Software on a Windows
System
Follow these steps:
1. Insert the EasyMP CD-ROM in your computer's CD-ROM or
DVD drive.
2. Click
, then follow the on-screen instructions to install
Install
your projector software.
3. When you see the Virtual Display screen, check each display you
want to use. These correspond to the projectors you plan to
connect to the computer.
After you install the software, you can change your Virtual
Display selection by accessing
menu and selecting
series G3 900 MHz or more, iMac,
®
EPSON Projector
Add-Remove EPSON Virtual Display.
®
from the Start