Presenting Image Files From An External Drive - Epson PowerLite 1705c User Manual

note
Make sure your camera
shows up on your desktop as
a drive letter. If it does, it is
probably a USB mounted
device and will work with
the projector software. The
EasyMP software does not
support TWAIN-compliant
digital cameras.
Presenting from a Digital Camera or External Drive
98
Downloaded From projector-manual.com Epson Manuals
9. Position the cursor on the image file you want to project and press
.
Enter
10. Select
View Image
want, you can press a side of the
image while you're viewing it.
To stop viewing images, press the
then select and press
Exit
Presenting Image Files From an
External Drive
This section explains how to project individual image or movie files
from an external hard drive or flash memory drive using EasyMP and
a USB connection.
Follow these steps:
1. Connect your external hard drive or flash memory drive (see
page 44).
2. Plug in your external hard drive.
3. Turn on the projector and the remote control, if they're not
already on.
4. Select EasyMP as the source by pressing the
the remote control.
5. Use the pointer button on the remote control to position the
cursor on the folder where your photos or movies are stored and
press .
Enter
6. Select
Open Folder
opens.
7. Position the cursor on the image file you want to project and press
.
Enter
8. Select
View Image
want, you can press a side of the
image while you're viewing it.
. The image is projected on the screen. If you
pointer button to rotate the
button on the remote control,
Esc
.
Enter
. You see your image files when the folder
. The image is projected on the screen. If you
pointer button to rotate the
button on
EasyMP