Call Forwarding; Overview Of Forwarding Types - Siemens OpenStage 30 T User Manual

Step by Step

Call forwarding

If your phone belongs to an ONS group (parallel
call page 112), please note the following:
Call forwarding can be configured on any phone
in the ONS group and will then apply to all
phones in that ONS group.
Call forwarding between two phones in an ONS
group is not possible.

Overview of forwarding types

You can configure different call forwarding settings for
your station.
FWD-VAR-ALL-BOTH on All calls are forwarded to the
FWD-FIXED on
FWD-VAR-ALL-INT on
FWD-VAR-ALL-EXT on
FWD-VAR-BUSY-BOTH
on
FWD-VAR-RNA-BOTH
on
FWD-VAR-BZ/NA-BTH
on
Apart from "Forwarding for intnl" and "Forwarding for
extnl", the forwarding types are mutually exclusive. You
can set and activate one forwarding destination for each
of the two exceptions.
Basic functions
saved phone number, the
phone number is deleted af-
ter deactivation.
All calls are forwarded, the
saved phone number is not
deleted after deactivation.
Only internal calls are for-
warded.
Only external calls are for-
warded.
If your station is busy, all calls
are forwarded.
If you do not answer a call, all
calls are forwarded after a
certain length of time.
If your station is busy or you
do not answer a call, all calls
are forwarded after a certain
length of time.
31