Ping; Ping6 - D-Link DGS-1210-28 Reference Manual

5 Command Line Interface

ping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 10.90.90.91:
DGS-1210-28> ping 10.90.90.91
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
--- 10.90.90.91 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DGS-1210-28>

ping6

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 3000::1:
DGS-1210-28> ping6 3000 ::1
Reply Received From : 3000 ::1, TimeTaken : 20 msecs
Reply Received From : 3000 ::1, TimeTaken : 20 msecs
Reply Received From : 3000 ::1, TimeTaken : 20 msecs
--- 3000 ::1 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DGS-1210-28>
To test the connectivity between network devices.
<ipaddr>
The ping command checks if another IP address is reachable on
the network. You can ping the IP address connected to through
the managed VLAN (VLAN 1 by default), as long as there is a
physical path between the switch and the target IP equipment. By
default, Switch sends five pings to the target IP.
<ipaddr> - The IP address of the host.
None.
To test the connectivity between network devices.
ping6 <ipv6addr>
The pingv6 command checks if another IP address is reachable
on the network. You can ping the IP address connected to
through the managed VLAN (VLAN 1 by default), as long as
there is a physical path between the switch and the target IP
equipment. By default, Switch sends five pings to the target IP.
<ipv6addr> - The IPv6 address of the host.
None.
8 7
8 7
D-Link Web Smart Switch User Manual