Manual Separation Pad; Removing The Right Cover (Rear) - Canon iR3570 Service Manual

2) Free the clutch cable [2] from the wire saddle [3].
3) Remove the fixing plate [4]. (2 screws [5])
4) Pull out the manual feed pickup clutch [1].

8.8.18 Manual Separation Pad

8.8.18.1 Removing the Right Cover (rear)

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N /
/ iR4570N / iR2230 / / / iR3530 /
1) Open the pedestal right door [1]. (if equipped with a 2-Cassette Pedestal-
Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover (rear) [4].
[2]
[1]
8.8.18.2 Removing the Right Door
iR3570 / iR4570 / / iR3570N / / iR4570N / iR2230 / / / iR3530 /
1) Open the right door.
F-8-327
F-8-328
[3]
[3]
[3]
[4]
F-8-329
2) Remove the screw [1], and detach the fixing plate [2].
3) Remove the joint shaft [1], and free the extension delivery unit [2] from
the right door.
0007-6714
4) Disconnect the connector [1], and remove the reuse band [2]; then, remove
the 2 screws (M4x8; RS tightening).
5) While freeing the hinge assembly [2], detach the right door.
0007-6715
Attaching the Right Door
Chapter 8
F-8-330
F-8-331
F-8-332
F-8-333
F-8-334
8-83