In the Send screen, press [Send Settings] button and [Doc Name OCR] button in sequence, and then press [Start] key. The first 24 characters (default) of the

first text block extracted from the first page of the scanned document will be automatically set as the document name. The number of the characters extracted

as the document name is changeable between 1 and 24 characters in user mode [Communications Settings > TX Settings under Common Settings >

PDF(OCR) Settings > Num. of Char. for Doc Name Setting].

14.2.10.2.8 DADF-N1: Scanning time in different size originals mode

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /

[ Manual-related ]

Description

When two single-sided different size originals, which, for example, are A3- and A4-size originals, are copied at the 100% scaling ratio to make two single-

sided prints, the length of time that the DADF-N1 needs for scanning such originals varies based on the mode ("Same Width" or "Different Width") selected

in the original type specification screen for the different size originals mode. The length of scanning time needed in "Same Width" mode is shorter than that

in "Different Width". This is because of the following scanning operation:

-In case "Same Width" is selected

The DADF-N1 picks up an original; when reading ends, it delivers the original as it is. (Normal rotation pickup/Delivery)

- In case "Different Width" is selected

The DADF-N1 feeds an original idly to check the size, and reverses it; when reading ends, it delivers the original as it is. (Idle feeding/Reverse pick-up/

Delivery)

14.2.10.2.9 How to expand Universal Send Kit-B1

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /

[ Case in the field ]

Description

When expanding the universal send kit-B1, follow the steps below.

1. Access the License Management System using the following URL: http://www.canon.com/lms/ir/

2. In the LMS screen, enter the 24-digit number indicated on the License Access Number Certificate and the serial number of the machine (e.g., ABC01234)

and then copy the 24-digit number shown on the Web browser screen in the space given for the purpose on the License Access Number Certificate sheet.

Note: Be sure to double-check the number to avoid an error. Be sure that the user is aware of the importance of the License Access Number Certificate and

that it must be stored away in a safe place.

3. In user mode [System Settings > License Registration], enter the 24-digit number obtained in step 2 and then press [Start].

4. Press and hold the control panel switch for 3 seconds or more, press [Start] on the LCD, turn the main power switch OFF in accordance with the instruction

on the LCD, and then turn the main power switch ON again more than 10 seconds later.

5. When the machine has started up, press the counter key on the control panel and then select [Device Configuration] to make sure that the name of this kit

is displayed as one of software options.