System Test - Bosch 2212 User Manual

System Test

I have this feature.
I do not have this feature.
This feature helps to ensure that your system is operating properly by
testing the system's bell, battery, and phone line. If any of these
components fails the test, contact your security company for assistance.
Be sure to contact your security company before you begin.
1. Make sure that the system is turned off (On light is off).
2. Press [1]. The display shows:
ENTER CODE TO
START TEST
3. Enter your passcode (Owner type required). If your passcode is
valid, the system test begins. The bell is the first component to
be tested. It rings for approximately three seconds:
TESTING BELL
4. The next component to be tested is the battery. This test could
take up to four minutes:
TESTING BATTERY
MAY TAKE 4 MIN.
If the battery passes the test, the display shows:
BATTERY TEST
PASSED
If the battery test fails, the display shows:
BATTERY TEST
FAILED
32