Static Ip Address - D-Link DWR-922 User Manual

4g lte router

Hide thumbs Also See for DWR-922:

Table of Contents

Section 3 - Configuration

Static IP Address

IP Address:

Enter the IP address provided by your ISP.

Subnet Mask:

Enter the subnet mask provided by your ISP.

Gateway

Enter the gateway address provided by your ISP.

Address:

MTU:

Maximum Transmission Unit - you may need to change the MTU

for optimal performance with your ISP. The default value is 1500.

NAT:

Check the box to enable Network Address Translation (NAT).

IGMP Proxy:

Check the box to enable IGMP proxy.

Enable PPPoE

Check the box to enable PPPoE passthrough.

Passthrough:

Enable IPv6

Check the box to enable IPv6 passthrough.

Passthrough:

Clone MAC:

Check the box to clone your client's MAC address to the WAN port.

DNS Mode:

If your ISP provided DNS server addresses to use, select Manual

DNS and enter the primary and (if applicable) secondary

addresses. Otherwise, select Auto DNS to automatically assign a

DNS server, or DNS Disabled to disable DNS.

D-Link DWR-922 User Manual

Table of Contents

Show Quick Links

Table of Contents