Lan; Lan Setup - D-Link DWR-922 User Manual

Section 3 - Configuration
On this page you can configure the local network settings of your router.
IP Address: Enter the IP address of the router. The default is 192.168.1.1.
If you change the IP address, you will need to enter the new IP
address in your browser to get into the configuration utility.
Subnet Mask:
Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
IGMP Snooping:
Check the box to enable IGMP snooping.
Secondary IP
Check the box to assign a secondary IP address to the router.
Enable:
Secondary IP
If a secondary IP address is enabled, enter the new IP address.
Address:
Secondary
If a secondary IP address is enabled, enter the subnet mask.
Subnet Mask:
Local Domain Enter the local domain name for your network.
Name:
D-Link DWR-922 User Manual

LAN

LAN Setup

21