To turn on or off the projector power
1
Select [ON] or [OFF] using the rotary 2 control,
and press the
key.
2
Press again the
[OK?] appears.
To control the shutter function of the
projector
1
Select [ON] or [OFF] using the rotary 3 control,
and press the
key.
2
Press again the
[OK?] appears.
Black signals are output from the PGM connector of the
SDI and DVI-D connectors to projectors without shutter
function.
NOTE
•
If the communication is interrupted during control of the
projector, operational consistency may not be maintained
between this unit and the projector. (For example, if the
communication cable is disconnected after the shutter is
turned off from the unit, the black signal is output from the
PGM connector.)
•
This unit monitors the condition of the projector at regular
intervals.
During projector monitoring, *** appears on the screen,
disabling this unit to control the projector.
30
key when the message
key when the message