Table of Contents
Advertisement
aria
●
20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria
aria
20A,
20,
Changing Differential Ring
Button
Press TRANS/PGM button.
Dial 5 0
Select the ring type by dialing 1~4.
Press HOLD/SAVE button.
Message Waiting
When the called extension does not answer the call, you can leave a message wait to the station.
Button
If a called party does not answer, press CALLBK button.
Hang up.
At that time, the LED of CALLBK button in the called station is flashing.
On LKD-2N/S, 8D/S,
If a called party does not answer, press TRANS/PGM button and dial 5 6
To answer a message waiting,
Press flashing CALLBK button.
Station that left message will be signaled with tone ring.
On LKD-2N/S, 8D/S,
Dial 5 7 to answer a message waiting.
Call Back
If you dial a station that is busy, you can leave a callback indication.
Button
After receiving intercom busy tone, press CALLBK button.
Hang up.
When the busy station hangs up, you will be signaled.
Answer the signal by lifting handset or by pressing MON button, the station you
called will be signaled.
Paging
A station, which is allowed to access page facilities, can connect and transmit voice announcement to any or all of the
system external/internal page zones.
Button
To make a page,
Lift handset.
Dial page zone. (See chart.)
And you will hear warning tone.
After the tone, speak your message.
Hang up.
Do Not Disturb
Button
If your phone has been programmed to have Do Not Disturb,
Press DND/FWD button while on-hook or your phone is ringing.
The LED is lighting and your phone is in DND.
To remove Do Not Disturb,
Press DND/FWD button while on-hook.
The LED is extinguished and DND at your phone is removed.
On LKD-2N/S, 8D/S,
Dial 5 3 instead of pressing DND/FWD
aria
20W
Procedures
Procedures
Procedures
Procedures
Procedures
All Call
# 0
Internal Zone 1
# 1
Internal Zone 2
# 2
Internal All Call
# 4
External All Call
# 3
button (Toggle setting).
11
Range
Range
Range
Range
Internal Zones:
1~2
Range
Advertisement
Table of Contents
