Alarm Reset; Lcd Language Change; Using Dial By Name; Two-Way Recording - LG Aria 20A User Manual

aria
●
20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria aria aria
20A, 20,
Wake-up Call
The system automatically sends ring signal to a station which registers a wake-up time. There are two kinds of wake-up
call, one is effective for one-day, the other is effective until canceled.
Button
To register wake-up time,
Press TRANS/PGM button.
Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.
Press HOLD/SAVE button for "one-day" or dial # and
HOLD/SAVE button for "until canceled". (Confirmation tone is heard.)
To cancel wake-up call,
Press TRANS/PGM button and dial 4 2.
Press HOLD/SAVE button. (Confirmation tone is heard.)

Using Dial By Name

Each station and speed dial number can be assigned to a name. When names are programmed, you may select a speed dial
number by the stored name.
Button
Press SPEED button twice.
On the display, you will see the following.
Select desired type.
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will
see the following:
Press the VOLUME button to see the next two names.
You may enter characters using the code in "Storing Dial by Name". The LCD will
display the first two names which match your input.
To select the name in line 1, press HOLD/SAVE button.
To select the name in line 2, dial 2 and press HOLD/SAVE button.
The call is placed automatically.

LCD Language Change

Button
Press TRANS/PGM button and dial 5 1 .
The language in LCD is changed into default value.
If pressing TRANS/PGM + 5 1, the language in the LCD is changed to the nation's
language.

Alarm Reset

Button
To terminate alarm signal while idle state,
Dial 6 5
Confirmation tone is heard and the alarm signal is terminated at all assigned stations.

Two-way Recording

While a CO line call, you can record the conversation and it will be saved in its own mailbox.
Button
To record the conversation,
Press the programmed {RECORD} button.
To program the {RECORD} button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] + # 4 + [HOLD/SAVE]
To finish the recording,
Press the programmed {RECORD} button again. Or, replace the handset.
20W
Procedures
Procedures
ICM : 1 U_SPD : 2 S_SPD : 3
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
Procedures
Procedures
Procedures
DIAL BY NAME
14
Range
Range
Range
Available by
Software:
16: Above V4.0
20W: Above V3.0
Range
Range