Licensing; Network And General Settings - Bosch DICENTIS Configuration Manual

DICENTIS
5.4.5

Licensing

Click the Licensing button to open the Licensing page.
Licensing is only required when you purchase software licenses.
The licensing page provides you with an overview of the activated licenses.
Activate a license:
To activate software you need to have an activation ID which was send by email after
purchasing the software license. Activation requires a USB memory stick and any PC
connected to the internet.
Note: License activation is not supported for tablets.
1.
2.
3.
4.
5.
Returning a license
The return license process is started in the license website.
1.
2.
3.
4.
5.
6.
7.
5.4.6

Network and general settings

Click the Network and general settings button to view the Network and general settings
page. To change theses settings, click the Change network settings button.
–
Bosch Security Systems B.V.
Insert the USB memory stick into the PC connected to the DCNM-WAP.
Click the Add license button.
Enter all required Customer information and Activation ID, click the Add button and
then the Activate button. Note: You can add more than one Activation ID. When all
Activation IDs are added, click the Activate button.
– A Save as dialog is shown. Save the Request file to your USB memory stick.
Go to the website https://licensing.boschsecurity.com using a PC/Laptop which is
connected to the internet, and login. If you do not have a username, contact your local
Bosch representative to acquire an account:
– Go to Manage license and upload the request file from the USB memory stick.
– Save the Response file to your USB memory stick.
In the DICENTIS web interface application, click the Process response message button.
Select the correct Response file, and then click Open.
– Now the license is activated.
– New functionality is added and can be used by the system.
Log on to https://licensing.boschsecurity.com
Go to the overview, and find the customer that the license must be returned to.
Click on the link in the Location column to open the System details pop-up.
Click the Return License button.
– A file will be generated. Save it to a USB stick.
Go to the license page of the web interface application.
Click the Process response message button.
– Select the correct file, and then click Open.
– A save as dialog is shown. Save the file to your USB memory stick.
Return to the license website, go to Manage license, and upload the Request file from
the USB memory stick.
– Now the license is returned.
Network settings:
– Network Name (SSID): Bosch DICENTIS (factory default).
– WPA2 Key (password): dcnm-wap (factory default).
– Channel: Shows the currently selected WiFi channel. This channel is automatically
defined by the system and cannot be changed.
Configuration manual
Web interface application | en
2015.03 | V1.0 |
19