Copying To External Media - Sony HVO-1000MD User Manual

Notes
• To cancel printing, select [Abort] and press the
ENTER button.
• When printing a 3D still image while the HVO-
3000MT is set to the 2D system mode, the image of
the input specified with the [Select Right/Left of
Image] setting in the [System Admin Settings]
screen - [3D/2D Settings] screen will be printed.
11
When printing is complete, press the ENTER button
while [Close] is selected.
The [Image List] screen appears again.

Copying to External Media

You can copy recorded data stored on the unit's internal
hard disk onto a BD/DVD disc, USB memory device, or
server.
Recorded data can be copied from the [Recording List]
screen or [Image List] (thumbnail display) screen.
To select data for copying from the
[Recording List] screen
This section describes how to select recorded data in the
[Recording List] screen for copying onto external media.
You can select whether to copy videos, still images, or
both with this procedure.
Notes
• If the power supply is disconnected before the writing of
the data is complete, the validity of the written data
cannot be guaranteed.
• When recording to external media, the media can be
switched out up to three times for a single piece of
recorded data. When this limit is exceeded, the
"Exchange media limit exceeded" message appears on
the [Save to] screen.
1
If you are copying to a BD/DVD disc or USB memory
device, insert the media into the unit.
62
Processing Recorded Data
2
Display the [Recording List] screen, use the V , v , B ,
and b buttons to select the operation box, and press the
ENTER button.
For details on displaying the [Recording List] Screen,
see "Image Search" (page 55).
The following screen appears.
3
Use the V and v buttons to select [Save to], and press
the ENTER button.
The [Recording List] screen appears again.
4
Select the check boxes for the recorded data you want
to copy.
Select recorded data using the V and v buttons, and
press the ENTER button to select or clear the check
box.