The Timer - Bosch NIT5065UC Use And Care Manual

The timer

It is programmed as
follows
Once the time has elapsed
Correcting the time
Switching the timer off
Recommendations and
warnings
20
This can be used to time periods up to 99 minutes. It is independent of the other
settings.
1. Press the Timer symbol. 00 appears in the time programming function display.
The ___, min and U indicators light up.
2. Set the required time using symbols 1 to 9.
After a few seconds, the ___ indicator goes out and the programmed time starts to
count down.
A beep sounds. 00 and U also appear in the time program function display. Press
the Timer symbol. The indicators go out and the warning beep stops.
Press the Timer symbol. The ___ and U indicators light up. Change the time using
symbols 1 to 9.
Press the Timer symbol. The ___ and U indicators light up. Then press the 0
symbol until 00 appears on the time program function display. The U indicator goes
out.
If the set time is not displayed, press the Timer symbol several times until the U
indicator lights up on the time program function display. To program a cooking time
of less than 10 minutes, always press 0 before selecting the required value. The
timer will be deactivated after a power outage. The element automatic OFF function
and the timer function can both be operated simultaneously.