Configuring Email Notification; Configuring Snmp Notification - HP P2000 G3 Reference Manual

Configuring email notification

To configure email notification of events
1. In the Configuration View panel, right-click the system and select Configuration > Services > Email
Notification.
2. In the main panel, set the options:
• Notification Level. Select the minimum severity for which the system should send notifications:
Critical (only); Error (and Critical); Warning (and Error and Critical); Informational (all). The default
is none (Disabled), which disables email notification.
• SMTP Server address. The IP address of the SMTP mail server to use for the email messages. If the
mail server is not on the local network, make sure that the gateway IP address is set in System
Settings > Network Interfaces.
• Sender Name. The sender name that, with the domain name, forms the "from" address for remote
notification. Because this name is used as part of an email address, do not include spaces. For
example: Storage-1. If no sender name is set, a default name is created.
• Sender Domain. The domain name that, with the sender name, forms the "from" address for remote
notification. Because this name is used as part of an email address, do not include spaces. For
example: MyDomain.com. If no domain name is set here, the default domain value is used. If the
domain name is not valid, some email servers will not process the mail.
• Email Address fields. Up to four email addresses that the system should send notifications to. Email
addresses must use the format user-name@domain-name. For example: Admin@MyDomain.com.
3. Click Apply.
4. Optionally, send a test message to the configured destinations as described on page 84.

Configuring SNMP notification

To configure SNMP notification of events
1. In the Configuration View panel, right-click the system and select Configuration > Services > SNMP
Notification.
2. In the main panel, set the options:
• Notification Level. Select the minimum severity for which the system should send notifications:
Critical (only); Error (and Critical); Warning (and Error and Critical); Informational (all). The default
is none, which disables SNMP notification.
• Read Community. The SNMP read password for your network. The value is case sensitive and can
include letters, numbers, hyphens, and underscores. The default is public.
• Write Community. The SNMP write password for your network. The value is case sensitive and can
include letters, numbers, hyphens, and underscores. The default is private.
• Trap Host Address fields. IP addresses of up to three host systems that are configured to receive
SNMP traps.
3. Click Apply.
4. Optionally, send a test message to the configured destinations as described on page 84.
HP StorageWorks P2000 G3 MSA System SMU Reference Guide 43