Panasonic KX-NS700 Operating Manual page 319

Button
Log-in/Log-out of a
specified group
Log-in/Log-out for all
groups
Hurry-up
Wrap-up
System Alarm
Time Service (Day/Night/
Lunch/Break)
Answer
Release
Toll Restriction (TRS)
Calling Line Identification
Restriction (CLIR)
Connected Line
Identification Restriction
(COLR)
Headset
Time Service Switching
Mode (Automatic/Manual)
Network Direct Station
Selection (NDSS)
CTI
Primary Directory Number
(PDN)
Document Version 2014-11
Select Log-in/Log-out from Type.
Then select Incoming Group from Parameter Selection.
And, enter the Incoming call distribution group extension number in
Extension Number.
Select Log-in/Log-out from Type.
Then select All from Parameter Selection.
Select Hurry-up from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Select Wrap-up from Type.
Select System Alarm from Type.
Select Time Service from Type.
Then in Parameter Selection, select which time modes will be switched
manually.
In Optional Parameter (Ringing Tone Type Number), select the Time
Table (tenant number) to be used for changing time modes in Automatic
Switching mode.
Select Answer from Type.
Select Release from Type.
Select TRS Level Change from Type.
Then select the Toll Restriction (TRS) Level (1–7) from Parameter
Selection.
Select CLIR from Type.
Select COLR from Type.
Select Headset from Type.
Select Time Service - Automatic/Manual from Type.
Then in Parameter Selection, select the Time Table (tenant number) to be
used when Time Service Switching Mode is set to Automatic.
Select NDSS from Type.
Then enter the another PBX extension number in Dial (max. 16 digits
consisting of 0–9).
Note
The button may not be available depending on the networking method in
use or the settings of the PBX.
Select CTI from Type.
Select PDN from Type.
3.2.1 User Programming
Steps
Operating Manual 319