Table of Contents
Advertisement
HP 27130B
Subfunction 3. Alert 1 Read Mode.
Data block
byte 0
~
enable alert 1 read mode
Validation: none
Subfunction 5. Transmission Mode.
Data block
byte 0
reserved
1
reserved
2
full duplex hard-wired
3
simplex transmit
4
simplex receive
Validation: The parameter value must be within the range 2 through 4, inclusive. The transmission
mode must be set before setting the read option. Note that the echo bit will be reset if the transmis-
sion mode is not full duplex.
Subfunction 6. Backspace Character. The character specified in the data block will be used as the
backspace character for the edit mode.
Validation: none
Subfunction 7. Line Delete Character. The character specified in the data block will be used as the
line delete character for the edit mode.
Validation: none
4-27
Advertisement
Table of Contents
