Outputting Images To An External Monitor For Playback; Setting The Outputs; Adjusting The Volume Level During Recording And Playback - Panasonic AG-HPG10P Operating Instructions Manual

Outputting images to an external monitor for playback

You can connect an external monitor to the output connector of the unit, output clips to the external monitor
and play them back on the monitor.
AUDIO OUT CH1/
CH2 connectors
Component
signal output
connector (D4
connector)
AG -HP G1

Setting the outputs

1
Hold down [POWER] for at least 2 seconds to turn the power on.
2
Press [THUMBNAIL/MODE].
The thumbnail display off screen appears.
3
Press [MENU/MODE CHK].
4
Using and
5
Using and
6
Press [MENU/MODE CHK] to end the procedure.
When the PC mode (Page 21) has been selected, no sound will be output from any of the connectors
except for the headphone jack.

Adjusting the volume level during recording and playback

The volume level of the sound from the speaker or headphone jack can be adjusted by pressing
the thumbnail display off screen during recording or playback.
48
VIDEO OUT connector
OUTPUT
AUDIO
CH 1 CH 2 VIDEO HD/SD-SDI
COMPONENT OUT 1394
This unit
HD/SD-SDI output
0
Video output/component
output/audio output
, select "AV OUT SETUP" setting item, and press
, select the setting, and press
HD/SD-SDI OUT
connector
.
External monitor
.
on