Hitachi CH 10DL Handling Instructions Manual page 7

d) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a fi re.
e) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
SHRUB SHEAR SAFETY WARNINGS
○ Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the shrub shear
may result in serious personal injury.
○ Carry the shrub shear by the handle with the cutter
blade stopped. When transporting or storing the
shrub shear always fi t the cutting device cover.
Proper handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
○ Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
GRASS SHEAR SAFETY WARNINGS
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operation practices
● Training
a) Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
b) Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
c) Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
● Preparation
a) Before use, check the supply and extension cord for
signs of damage or aging. If the cord becomes damaged
during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the
appliance if the cord is damaged or worn.
b) Never operate the machine while people, especially
children, or pets are nearby.
c) Wear eye protection and stout shoes at all times while
operating the machine.
● Operation
a) Keep supply and extension cords away from cutting
means.
b) Use the machine only in daylight or good artifi cial light.
c) Never operate the machine with damaged guards or
shields or without guards or shields in place.
d) Switch on the motor only when the hands and feet are
away from the cutting means.
e) Always disconnect the machine from the power supply
(i.e. remove the plug from the mains or remove the
disabling device)
– whenever leaving the machine unattended;
– before clearing a blockage;
– before checking, cleaning or working on the machine;
– after striking a foreign object;
– whenever the machine starts vibrating abnormally.
f) Take care against injury to feet and hands from the
cutting means.
g) Always ensure that the ventilation openings are kept
clear of debris.
● Maintenance and storage
a) Disconnect the machine from the power supply (i.e.
remove the plug from the mains or remove the disabling
device) before carrying out maintenance or cleaning
work.
b) Use only the manufacturer's recommended replacement
parts and accessories.
c) Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
d) When not in use, store the machine out of the reach of
children.
● Recommendation
a) The appliance should be supplied via a residual current
device (RCD) with a tripping current of not more than
30 mA.
PRECAUTIONS FOR SHRUB SHEAR AND
GRASS SHEAR
1. Before starting work make sure there are no power cables
in the work area. The blade could come into contact with
the power cable causing electric shock, ground faults
and other accidents.
2. Hold the tool fi rmly with both hands during use to prevent
injury.
3. Keep your hands and all parts of the body away from the
blade to prevent contact that could lead to injury.
4. Make sure the blade and all accessories are properly
installed. Improper installation could cause the blade or
accessories to come loose resulting in an injury.
5. Make sure the blade is not cracked, deformed or
excessively worn before starting work. Do not use a
blade in this condition as it could break and cause injury.
6. Do not use the tool to cut wire, metal plates or other hard
objects. The tool could be damaged and cause injury.
7. If the tool does not work normally and is producing strange
noise, turn it off immediately and have it inspected and
repaired.
8. If the tool falls or strikes against an object, check the blade
and the body for damage, cracking and deformation. Use
of a damaged, deformed or cracked blade could result in
injury.
9. Do not disassemble the blade. This may result in injury.
10. This product generates vibration during operation. This
makes long continuous work physically strenuous so avoid
a poor work posture and be sure to take frequent rests.
Also during short work periods, stop work immediately to
take a rest when your fi ngers, hands, arms or shoulders
become tired.
English
7