Panasonic DP-3000 Technical Manual page 13

1.1.7. Sleep Mode
Note:
When 10/100 Ethernet Interface / Internet Fax Kit is installed, the Sleep Mode is disabled.
This function reduces the power consumption in standby mode. During Sleep Mode, power is supplied only
to the Energy Saver Lamp to keep it at a steady ON condition, to the circuit that monitors incoming Ringing
signals and to circuits that maintain Deferred communications. The power is recovered only when an
incoming Ringing signal is detected, the time to perform a Deferred communication has lapsed or the
Energy Saver key is pressed.
No.
1 10/100 Ethernet Interface/Internet Fax Kit
Option is installed
2 When an ALARM Status indication is dis-
payed
No.
1 When Energy Saver key is pressed
2 Deferred Communication time is lapsed
3 Time for Deferred Communication
4 Original Sensor is actuated
5 Ringing signal detected
6 Off-Hook (External telephone or Handset)
7 When printing from a PC
Sleep Mode Availability
Item
Recovers from Sleep Mode
Item
Sleep Mode
No
No
Recovers from
Sleep Mode
Yes
Yes
Yes
Yes No Document Sensor with Flatbed
Yes No 1300Hz detection
Yes
Yes
13
Remark
Remark