Miele KF 1801 Vi Operating And Installation Instructions page 60

Mains water connection
Before using the appliance for the first
time, the water inlet pipe should be
purged of air by a qualified and
competent person.
– To do so, the stainless steel hose
should be filled as far as possible
with water before being connected to
the appliance.
– Mop up any spillages with a cloth.
^ Place the stainless steel hose in the
building-in niche as shown, and
secure to the floor with adhesive
tape.
This ensures that the hose does not
slip or get caught when the
appliance is pushed back into the
niche.
^ The appliance can now be installed
in the niche (see "Installation").
60
On appliances with a feed-through for
the water inlet hose,
^ position the appliance in front of the
building-in niche and insert the
stainless steel hose into the
feed-through at the back of the
appliance.
By this time the building-in niche should
already have been prepared so that the
appliance need only be pushed into it
(see "Installation").
^ Continue with the installation of the
appliance.