Miele KF 1801 Vi Operating And Installation Instructions page 85

When fitting the drawer front, bear in
mind the gap between the drawer and
the refrigerator door front:
^ Measure gap Y between the
adjusting bar on the freezer drawer
and the refrigerator door.
^ A gap of 3 mm needs to be
maintained between the drawer and
refrigerator door.
Fitting the fixing brackets
The fixing brackets are used to secure
the furniture front to the freezer drawer
at the bottom.
^ Open the freezer as far as it will go.
^ Slightly loosen screw (1.).
^ Position the fixing bracket on the
drawer (2.) and pre-drill a hole in the
furniture front.
^ Screw the fixing bracket securely to
the furniture front (3.)
^ Then tighten the screw (4.) as shown.
^ Fit the cover to the fixing bracket (5.).
The number of fixing brackets required
will depend on the material and width of
the furniture front.
Installation
85