Plug-On Transmitter (Utx-P03) - Sony UWP-D11 Operating Instructions Manual

Plug-on transmitter (UTX-P03)

Front
Bottom
a Audio input connector (XLR type)
Connect to a microphone or the line output of an audio
mixer or other device.
b +48V (+48 V supply) indicator
Lights up when the unit is set to LINE input and is
supplying power to the connected microphone.
c POWER indicator
Displays the battery level and charging status.
Indicator display Status
On (green) Sufficient battery level
Flashing (green) Battery is getting low
On (orange) Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
Off Power is off or battery is empty
d AUDIO (audio input level) indicator
Turns on or off according to the audio input level as
follows.
On (red): Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level (page 27).
On (green): Audio input level is appropriate.
Off: There is no audio input or input level is too low.
Flashing (orange): Audio is muted (i.e., disabled).
e POWER/MUTING button
Turns the power on/off. You also use this button to turn
the muting function on/off.
Function Operation
Supply ON Press button for one second or longer
Supply OFF Press button until the indicator turns
off
Muting ON Press button
Muting OFF
f Display section
A RF transmission indicator
Displays the current transmission status.
: Transmitting
– : Transmission stopped
B RF transmission power indicator
Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.
For details on the RF transmission power setting
function, see "Setting the transmit output level (RF
POWER)" (page 27).
C Audio input level meter
Displays the audio input level.
D Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
E Input level indicator
Displays the input level status.
: Microphone input
: Line input
F Battery level indicator
Displays the battery level. Displays "EXT" when power
is supplied from the USB connector.
For details, see "Battery level indicator" (page 15).
11
Name and Function of Parts