Attaching Accessories To The Portable Diversity Tuner (Urx-P03) - Sony UWP-D11 Operating Instructions Manual

Disconnecting a microphone or cable
Press the release button and pull the microphone
or cable out slowly.
Attaching accessories to the
portable diversity tuner (URX-P03)
Connecting the conversion cable to the
OUTPUT connector
Example: XLR-BMP conversion output
cable for the URX-P03
For a secure connection, turn to lock the
connector.
Attaching a belt clip
See "Attaching a belt clip" (page 17).
18
Attaching Accessories
Microphone or
cable connector
Release button
Attaching the shoe mount adapter
Attach the belt clip before attaching the shoe mount
adapter (page 17).
Note
Attach belt clips upside-down if planning to attach the
shoe mount adapter.
Push the bottom of the belt clip to make some space
between the belt clip and the tuner (1), align the belt clip
with the two vertical grooves on the shoe mount adapter, and
insert the adapter in the direction of the arrow (2). Push the
shoe mount adapter in fully until the belt clip fits into the
horizontal groove on the adapter holds.
Note
If attaching a camcorder, bend the URX-P03 antenna
down so that the antenna is not reflected on the display.
To remove the shoe mount adapter
Push and hold the part labeled "PUSH" on the shoe mount
adapter 1, and disengage the horizontal part of the belt clip
from the horizontal groove on the shoe mount adapter (2).
Then, push the shoe mount adapter in the direction of the
arrow (3).