Inserting the plug-on
transmitter (UTX-P1) into
the supplied soft case
Insert the UTX-P1 into the supplied soft
case with the rear side up, and close the
flap.
Attaching the optional
accessory to the plug-on
transmitter (UTX-P1)
To attach a microphone or a
cable
Push the microphone or cable
connector (XLR-3-12C connector)
against the audio input connector of
the UTX-P1 until it clicks into place.
Microphone or
cable connector
To detach a microphone or a cable
Press the release button and pull off
the microphone or cable slowly.
Attaching the supplied
accessories to the portable
diversity tuner (URX-P2)
To connect the supplied
conversion cable to the
OUTPUT connector
Example: XLR-BMP conversion output
cable for the URX-P2 (supplied)
For a secure connection, be sure to turn
and lock the connector cover.
To attach the belt clip
See "To attach the belt clip" on page 30.
To attach the shoe mount
adapter
Before attaching the shoe mount adapter,
attach the belt clip (see page 30).
Attachment and Installation Procedures
Microphone or
cable connector
Release button
31