Canon ImageRunner 2545i Reference Manual page 49

● If you are loading envelopes into the stack bypass:
2
2-24
Loading Paper in the Stack Bypass
❑
Take five envelopes, loosen them as
shown, and then stack them together.
Repeat this step five times for each set of
five envelopes.
❑
Place the envelopes on a clean, level
surface and press all the way around the
envelopes in the direction of the arrows
to remove any curls. Repeat this step five
times for each set of five envelopes.
Take particular care to spread the
envelopes out in the direction that they
will be fed.
❑
Hold down the top edge of the envelopes
firmly, so that the flaps stay flat.
NOTE
• If the envelopes become filled with
• If you feed envelopes that have glue
Flap
air, flatten them by hand before
loading them in the stack bypass.
attached to their flaps, the glue may
melt due to the heat and pressure of
the fixing unit.