Entering A User Id And Password - Canon ImageRunner 2545i Reference Manual

2
2

Entering a User ID and Password

If User ID Management has been set, you must enter your user ID (and password)
to log in to the machine.
IMPORTANT
To log in to the machine, you must have a valid user ID (and password) registered in
the machine beforehand. For instructions on how to register a user ID and password,
see Chapter 3, "Specifying Department ID and User Management," in the Remote UI
Guide.
1
NOTE
• If no password is set for the user ID, leave [Password] blank.
• If you make a mistake when entering the user ID/password, press
the correct ID/password.
• You can also use a standard USB keyboard to enter characters. (See "Entering
Characters Using a USB Keyboard," on p. 2-7.)
2-12
Logging in to the Machine
When your operations are
complete, remove the control
card from the card slot.
NOTE
You can remove the control card
before all the jobs in the machine's
memory are complete. The machine
automatically logs out as soon as
these jobs are complete.
Enter your user ID and password
(up to 32 digits respectively)
using the on-screen keyboard
and - (numeric keys).
❑
Press [User ID] ➞ enter your user ID ➞
press [OK].
❑
Press [Password] ➞ enter the password
➞ press [OK].
The characters that you enter for the
password are displayed as asterisks
(********).
(Clear) ➞ enter