Installation Summary; Included Parts - HP AdvanceStack Hub-16U Installation And Reference Manual

Installing the Hub

Installation Summary

The basic hardware installation procedure for the Hub-16U is as follows:
1. Install the optional HP AdvanceStack 8U/16U SNMP Module and/or
2. Verify the hub's operation.
3. Mount the hub in a rack, on a wall, or place it on a tabletop.
4. Connect the hub to a network, and connect computer(s) and/or

Included Parts

Each Hub-16U has the following components shipped with it:
1-2
one of the optional HP Transceiver Modules.
other device(s) to the hub's ports.
HP AdvanceStack Hub-16U Installation and Reference Guide—this
manual (J2611-90101)
A power cord, one of the following:
Australia/New Zealand
Denmark
Europe
Japan
Switzerland
United Kingdom
U.S./Canada
accessory kit:
– two mounting brackets
– four rubber feet
– one tie-wrap
– four 3/8-inch M3 machine screws
– four 5/8-inch number 12-24 screws
(8120-1369)
(8120-2956)
(8120-1689)
(8120-4753)
(8120-2104)
(8120-1351)
(8120-1378)