Installing the Hub
This chapter describes how to install the HP AdvanceStack Hub-8U, verify
its operation, and connect it to a network, other hubs, computers, and/or
other devices.
Installation Summary
The basic hardware installation procedure for the HP AdvanceStack Hub-8U
is as follows:
1. Install the optional HP AdvanceStack 8U/16U SNMP Module and/or
2. Verify the hub's operation.
3. Mount the hub on a wall or under a tabletop.
4. Connect the hub to a network or other hubs, and connect
5. (Optional) Connect the hub to the AdvanceStack 8U/16U SNMP
Included Parts
Each HP AdvanceStack Hub-8U has the following components shipped with
it:
1-2
one of the optional HP Transceiver Modules.
computer(s) and/or other device(s) to the hub's ports.
management console.
HP AdvanceStack Hub-8U Installation and Reference Guide—this
manual (J2610-90101)
An ac power cord, one of the following:
Australia/New Zealand
Denmark
Europe
Japan
Switzerland
United Kingdom/Hong Kong
U.S./Canada
A power supply, part number 0950-3058
(8120-1369)
(8120-2956)
(8120-1689)
(8120-4753)
(8120-2104)
(8120-1351)
(8120-1378)