Verify The Hub's Operation - HP AdvanceStack J2610B Installation And Reference Manual

2. Verify the hub's operation

Your hub uses power from an ac adapter.
N o t e
If your installation requires a different power cord than the one supplied
with the hub, contact your HP-authorized LAN dealer or your local HP
sales office.
The hub does not have a power switch; it is powered on when the power
cord is plugged in.
To provide power to the hub, follow these steps:
1. Plug the power supply into the receptacle on the hub marked
2. Plug the ac power cord into an ac power source. When installing
Example of an ac power cord
for a U.S. outlet. Plug the ac
power cord provided with your
hub into an ac power source.
"Power".
the Hub-8U, note that the ac outlet must be installed near the equipment
and should be easily accessible.
power supply
Installing the Hub
Power receptacle
on the back of the
hub.
1-5