Mounting The Hub - HP AdvanceStack J2610B Installation And Reference Manual

Installing the Hub

Mounting the Hub

After the screws are in place, follow the steps below for mounting the hub
on a wall or under a desk.
1. For a vertical mount (such as a wall), place the bottom of the hub
2. Slide the hub in either of the two diagonal directions to secure the
(Actual size of number 6
by half-inch or
M3 x 12 mm pan head
wood screw)
1-8
against the screws. For a horizontal mount under a surface such as a
desk or table, turn the hub upside down and gently place the hub up
against the screws.
hub into place.