Mounting A Hub In A Rack Or Cabinet - HP J2415A Installation And Reference Manual

Mounting a Hub in a Rack or Cabinet

The Hub-14 is designed to be mounted in any EIA-standard 19-inch telco
equipment rack.
W a r n i n g
The rack or cabinet should be adequately secured to prevent it
from becoming unstable and/or falling over.
1. Using a Phillips (cross-head) screwdriver, attach the mounting brackets
Align top of bracket
with top of hub
10-mm M4
screws
to the hub with the 10-mm M4 screws included in the Accessory Kit. The
top of each bracket should align with the top of the hub. Be careful not
to overtighten the screws.
Note that several different rack mount positions are possible by using the
different holes in the bracket and the hub. The illustration shows the
recommended position for rack mounting to provide the best weight
distribution for the hub.
Installing the HP AdvanceStack Hub
1-9