HP J2415A Installation And Reference Manual page 113

O
online help, in HP Stack Manager ... 2-4
out-of-band management
chain cables ... A-3
description ... 4-4, 4-8
RS-232 port cable ... A-6
P
parts list ... 1-4
password protection ... 2-17
using HP Stack Manager ... 2-16
physical specifications of hubs ... B-2
Ping test ... 3-5
point to point
See WAN
ports ... 1-17
cable management ... 1-20
connection procedures ... 1-14
counters, display of ... 2-10
enabling and disabling ... 2-8
Ethernet/IEEE 802.3 LAN ... 1-19
for cascading hubs ... 4-5, 4-8
for chained hubs ... 1-22, 4-4
LEDs ... 3-2, 4-2 – 4-3
management console ... 1-21, 4-4, 4-10
status using HP Stack Manager ... 2-8
using bundled/unbundled cables ... 1-16, 4-5
power ... 4-7
cables ... 1-4
caution statement ... 1-6, 1-8
LED ... 4-2
PPP ... 4-14
priority
See high priority, normal priority
private mode
cabling requirements ... 1-16
HP Stack Manager setting ... 2-10
security and ... 4-11
promiscuous mode
100VG uplink port ... 4-6
cabling requirements ... 1-16
HP Stack Manager setting ... 2-10
security and ... 4-11
R
rack mounting ... 1-9
Redundant Uplink Ports
from HP Stack Manager ... 2-7
reset
factory ... 2-16
factory, effect ... 2-15
reset button ... 4-4
using HP Stack Manager ... 2-15
RJ-45 connectors
connecting chained hubs ... 1-22, 4-4
connecting network devices ... 1-14, 4-5
wiring diagram ... A-4
root hub
See cascading hubs
RPS connector ... 4-7
RPS LED ... 3-2, 4-3
RS 232 port
See serial port
S
Safety information ... C-2
Security ... 2-16, 4-11
from HP Stack Manager ... 2-12
send alarm ... 2-14
Security LED ... 4-3
self-test
LED operation ... 1-7
resetting the hub ... 2-15
Send alarm ... 2-14
serial port ... 4-10
cable ... 1-4
communications settings ... 2-6
connecting a management console ... 1-21
– 1-22, 4-4
See also console port
SmartBoot ... 4-15
SMDS ... 4-14
SNMP/Bridge module ... 1-4, 4-12
connecting Ethernet/IEEE 802.3 LANs ...
1-19
Exp Slot LED ... 3-2, 4-2
installation ... 1-5
software
Index
Index-5