Device Configuration; Network Counters - HP J2415A Installation And Reference Manual

Installing and Using HP Stack Manager

Device Configuration

Allows you to specify three selections:
(Because the HP J2414B 100VG/ET SNMP/Bridge Module does not support
Token Ring, Token Ring cannot be selected if this module is installed in the
hub.)

Network Counters

LAN port counter values are useful when diagnosing problem conditions.
If you click on the Counters icon in the Hub Panel Graphic toolbar, the
Counters window is displayed. In the Counters window, a summary table
lists several counter values for the LAN ports. You can view other groups of
counters using the "Counter Group" selection list.
Counters provided are listed on the next page.
2-10
whether cabling is bundled (default is "some bundled"). If any ports on
the hub are connected to a 25-pair bundle, ensure that the hub port
cabling is set to "some bundled".
the type of frames transmitting through the hub (Ethernet or Token Ring)
how addresses should be displayed (Ethernet or Token Ring)