Programming the Unit
Parameters
When programming the unit from the front panel, the current setting is indicated on the display by "ü".
SIP Ext. No.
Allows you to confirm the unit's SIP extension number. This parameter is only available when the operation
mode is set to "IP-PBX".
To change the SIP extension number, see page 25.
Show IP Address
Description
Allows you to confirm the unit's IP address.
To change the IP address, see page 24.
Operation Mode
Description
The unit can be operated as a SIP extension of the PBX, a
peer to peer IP conferencing telephone, or a computer's
USB audio device.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 45).
Basic Settings
Language
Description
Determines the display language.
Use the following procedure to change the language.
1.
Press [MENU].
2.
Press [ ] or [ ] repeatedly to select "Basic
Settings".
3.
Press [ENTER] two times.
4.
Press [ ] or [ ] repeatedly to select the desired
language.
5.
Press [ENTER].
6.
Press [MENU].
48
Operating Instructions
Description
Available Settings
—
Available Settings
IP-PBX
Peer to Peer
USB Audio
Available Settings
English(US)
Español
Français
Français(C)
Italiano
Nederlands
Português
Deutsch
English(UK)
Default Setting
192.168.0.2
Default Setting
IP-PBX
Default Setting
English(US)
Document Version
2010/02