Parameters
When programming the unit from the front panel, the current setting is indicated on the display by "ü".
SIP Ext. No.
Allows you to confirm the unit's SIP extension number. This parameter is only available when the operation
mode is set to "IP-PBX".
To change the SIP extension number, see page 27.
Show IP Address
Allows you to confirm the unit's IP address.
To change the IP address, see page 26.
Operation Mode
The unit can be operated as a SIP extension of the PBX, a
peer to peer IP conferencing telephone, or a computer's
USB audio device.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Document Version
2010/02
Description
Description
Description
Available Settings
Available Settings
IP-PBX
Peer to Peer
USB Audio
Programming the Unit
Default Setting
—
192.168.0.2
Default Setting
Operating Instructions
IP-PBX
51