Lo/Dxbutton,Radiomodeselect Button, Presetting Stations - Sanyo CDF-R800 Operating Instructions Manual

LO/ DX button,
Radio
modeselect button, Presetting stations
LO I
Auto travel preset button
Radio mode select button————
DX button (Selecting seek sensitivity of Auto tuning)
Press the LO/ DX button ( = ) for 1.5 seconds or more to select the desired seek
sensitivity.
With each press, [DX] indicator appears and disappears.
To receive local stations with strong signals, make the [DX] indicator disappear.
To receive distant stations with weaker signals, make the [DX] indicator appear.
Radio mode select button
D
Press the Radio mode select button ( 4 ) to switch immediately to Radio mode
from other mode (CD, Changer, Power off mode).
presetting
StZItiOI'IS ...... . ... There are 2 types as follows.
Manual preset ............. 6
Staticms can be preset cm
each band (FMI, FM2, AM).
How to preset
1. Select the desired band (FMI, FM2, AM) and tune to the station to be memo-
rized.
2. Press the desired preset button for 1.5 seconds or more.
3. To preset additional stations, repeat procedure 1 and 2.
How to recall
Select the desired band and press the desired preset button.
Auto travel preset ......... The unit will scan the selected band (FM or AM) and
memorize the 6 strongest stations.
How to preset
1. Select the desired band (FM or AM).
2. Press the Auto travel preset button ( ~ ) untill the [ – –– ] indicator appears
(for about 1.5 seconds). The indicator [ATP] will flash on and off. The unit will
scan the band for the strongest 6 stations and automatically memorize them.
Scanning will stop and the first memorized station will be heard.
Notes:
/f ail stations are weak, none
maybe memorized. If
this should occur, [000] will
appear on the display. The station received last will be selected.
. If there are fewer than 6 receivable stations, the unit will memorize all the receiv-
able stations, then the first memorized station will be selected.
15