Before Operation - Sanyo CDF-R800 Operating Instructions Manual

How to recall
Select the desired band and press the Auto travel preset button ( @ ) for less
than 0.5 seconds. Each time the button is pressed, the remaining ATP station will
be selected in the order they were memorized.
Before operation
Preparation
1. According to this manual, connect a compatible SANYO CD Changer (FXD-C300,
FXD-C600, FXD-CIOO) to this unit.
2. According to the manual of CD changer, load discs into magazine and install the
magazine to the CD changer.
Hint:
You can connect a second CD Changer. (See below. "Changer select button'~
Changer select button
Using a separately available SANYO Divider unit
Changer select button
e
(FTP-CH1 S), a second CD Changer can be connect-
ed. When you connect two CD Changers, select the
[
desired CD Changer with this button. With each
+ '"1 **
E
press, the Changer No. indicator [@I
, @~]
& ???Q'
changes.
r-mm —
Notes:
. According to the manuals of CD changers and Divider unit, set the ID switches of
CD changers beforehand.
. This button is not effective when only one CD changer is connected.
CD
Changer 1
(@I)
CDF-R800
CD Changer 2(@rI)
16