Epson Multimedia Storage Viewer P-6000 Basic Operation Manual page 29

Resetting the Viewer
When an error occurs and operations cannot be done,
you can reset the viewer by pressing the Reset button
with a thin object as shown below.
Note:
Avoid using fragile objects such as a pencil.
Formatting Data in the Viewer
You can delete all of the data from the viewer. Settings
in the viewer itself are not deleted.
Note:
Before formatting, be sure to backup important data to an
external hard disk, memory device, or computer.
1. Connect the AC adapter to the viewer.
2. Turn on the power while holding down
simultaneously.
3. Select Yes using / , and then press
4. Input the four digit password using
and then press to finish.
5. When the format confirmation message appears,
select Yes using / , and then press
6. When a message appears indicating that formatting
is complete, turn off the power.
and
.
, , and ,
.
29
Troubleshooting
7
7
7
7
7
7
7
7
7
7