Mounting The File Server; Proxy Settings - Sony SRPC-5 Operation Manual

the IP address of the network adaptor that will be used for
transfer as well.
When a commercially available 10GbE card or
other option is installed in the PCIe expansion
slot
Configure the IP address and other items under
NETWORK (OPTION 1) and NETWORK (OPTION 2).
Configure the settings so that the segments differ.

Mounting the File Server

Mount the shared disk of the file server as follows.
1
Click the DISK SETUP menu button in the web
application screen, and click the DISK CONTROL
tab.
The DISK CONTROL tab screen appears.
2
Configure the TYPE setting to select the shared disk
protocol for the server to be mounted.
You can select from NFSv3, NFSv2, CIFS, or DEV.
When mounting a hard drive connected to an eSATA
card, select DEV.
Note
HFS+ is the recommended file system.
Be sure to unmount an HDD connected via eSATA
when removing it.
3
Configure the following settings based on the protocol
selected in step 2.
For the NFSv3 or NFSv2 protocol
OPTION: Server mount option.
SERVER IP: IP address of the server.
SERVER DIR: Path to shared directory provided by
the server.
For the CIFS protocol
OPTION: Server mount option.
SERVER IP: IP address of the server.
SERVER DIR: Path to shared directory provided by
the server.
USER NAME: Name of user accessing the server.
DOMAIN: Domain to which the user belongs.
PASSWORD: Password used to access the server.
14
Setup
For the DEV protocol
OPTION: Mount option.
DEVICE: Select the device that will be mounted from
the list of connected device types.
NODE: Select the node that will be mounted from the
list of connected device node names.
Note
The OPTION setting should be left blank during
normal use.
However, if you want to optimize transfer speeds by
specifying the block size for files at the time of disk
mounting, enter the data as shown in the following
example.
Example) wsize=32768, rsize=32768
Consult your file server administrator if the OPTION
setting requires configuration.
4
Click the MOUNT button to mount the file server or
device.
After the server is mounted, the MOUNT button will
change to the UNMOUNT button.
5
Configure the LIST TYPE setting to specify how
image clips on the shared directory of the mounted file
server are displayed.
Main: Display only the main image files.
Main+Proxy: Display main image files and proxies.
Others: Display non-image files.
To unmount the server
Click the UMOUNT button on the DISK CONTROL tab
screen.
Note
Unmount the server before turning off the unit or before
the unit restarts after changing the unit format settings.

Proxy Settings

1
Click the PROXY SETUP menu button in the web
application screen, and click the PROXY SETUP tab.
The PROXY SETUP tab screen appears.
UMOUNT button