Table of Contents
Advertisement
2
Select the video format in the matrix table.
Select the format from the "4096 × 2160 / F65RAW"
option in the matrix table when playing F65RAW
files.
Notes
• When playing F65RAW files, do not use it for any
purpose other than monitor output.
• When selecting any one of 23p, 24p, 25p or 29p
from "4096 × 2160 / F65RAW" in the matrix table,
those options will convert to 23PsF, 24PsF, 25PsF,
or 29PsF respectively and output to the monitor.
Additionally, when 50p or 59p is selected, those
options will convert to 25PsF or 29PsF and output to
the monitor.
3
[PC5] Select one of the following in the DUAL/3G
setting.
DUAL: Dual link (1.5G HD SDI)
3G: 3G HD SDI output
Lookup Table (LUT) Settings
It is possible to load lookup table (LUT) files to the LUT
banks of the unit using the web application.
The eight LUT banks provided in the unit are used to store
LUTs that are used for importing, exporting data from the
tape and monitor signal output from the port.
LUT files stored in the banks are maintained even after the
unit and VTR are turned off.
The bit depth of LUT files can be applied 8, 10, 12, and 16-
bit data. Note, however, that the lower four of 16 bits are
ignored because of the hardware's 12-bit process.
On the contrary, when the bit depth of the input data is 8 or
10, the signal is linearly interpolated into 12-bit data.
For details on applicable LUT file formats, see "LUT File
Formats Applicable to This Board" in "Appendix".
1
Click the SRPC SETUP menu button, and click the
LUT tab.
The LUT tab screen appears.
2
Set the following items.
Item
Function/settings
BANK
Selects one of the eight banks
(BANK 1 to BANK 8).
WP check box
Check this box when you do not
want to overwrite the contents of
the selected LUT bank.
3
Click the [Browse...] button to open the local disk or
external media of the web client, then select the LUT
file. And then, click the LOAD button.
The selected LUT file is loaded to the LUT bank
selected in step 2.
Clearing the contents of a LUT bank
Select the bank whose contents you want to delete, and
then click the CLEAR button.
Checking the names of files loaded to the
LUT bank from the VTR
Use the NETWORK2 SETUP menu from the OTHERS
CHECK menu within the MAINTENANCE menu of the
VTR.
For details on the MAINTENANCE menu of the VTR, refer
to the Installation Manual supplied with the SRW-5800.
Configuring the Monitor Output
Adjustment Settings
Color control function for the monitor output can be set
using the web application or through control panel
operation on the VTR.
17
Setup
Advertisement
Table of Contents
