Table of Contents
Advertisement
MICOM FUNCTION AND CIRCUIT DIAGRAM
6. MICOM Function and Circuit diagram
6-1. Functions
6-1-1. Displays
1. At the first power-up, the machine is unlocked. And, the initial setting is 14°C/RED for top, 8°C/WHITE for bottom.
6-1-2. Lock/Unlock Function
1. By pressing the 'Lock/Unlock' button for 3 seconds, it will unlock the machine. If the control panel is idle for 10 second, it
will automatically lock itself.
2. 1 minute after the lock, the luminosity of the display will decrease.
3. You have to cancel the lock in order to operate the machine.
6-1-3. Setting the top/bottom parts' storage temperature
(1) Top temperature setting
1. With the lock off, set the top storage temperature using '
2. By pressing ' '
It will display in the order of
3. By pressing ' '
It will display in the order of
4. NOTE: Top temperature cannot be lower than the bottom
(2) Bottom temperature setting
1. With the lock off, set the top storage temperature using ' ', ' ' button on the right side of the display.
2. By pressing ' '
It will display in the order of
3. By pressing ' '
It will display in the order of
4. NOTE: Bottom temperature cannot be higher than the top.
6°C
11°C
WHITE LED ON
18°C
12°C
RED LED ON
6°C
11°C
WHITE LED ON
18°C
12°C
RED LED ON
', ' ' button on the left side of the display.
12°C
18°C
RED LED ON
11°C
6°C
WHITE LED ON
12°C
18°C
RED LED ON
11°C
6°C
WHITE LED ON
- 21 -
Advertisement
Table of Contents
