Handle Disassembling, Assembling Instruction
10. Handle Disassembling, Assembling Instruction
10-1. Before you disassemble the handle.
1. Empty the refrigerator before you disassemble the handle.
2. Following tools are required.
3. Do not tilt the refrigerator.
4. Be careful not to drop the handle when disassembling/assembling.
Rubber hammer
(+), (-) Driver.
10-2. Take off the gasket.
1. Be careful not to tear the gasket when separating the part.
2. It is much easier if you pull the corner of the gasket.
10-3. Separate the handle and the bar.
1. Take out 3 screws on the bottom of the handle.
2. Take out 3 screws on the top of the handle.
10-4. Separate the supporter and the handle(U/L).
1. Use the rubber handle for supporter and handle (U/L) separation.
10-5. Reverse the order for assembling the parts
- 42 -